Allied Telesis management software layer 2+ fast ethernet switches manual

	AT-S62 Command Line User’s Guide
forcestpcompatible	The bridge uses the RSTP
	parameter settings, but
	transmits only STP BPDU
	packets from the ports. This
	option is equivalent to the
	STPCOMPATIBLE option.
normalrspt	The bridge uses RSTP. It
	transmits RSTP BPDU
	packets, except on ports
	connected to bridges
	running STP. This is the
	default setting.

Description

This command configures the following RSTP parameter settings.

❑Bridge priority

❑Hello time

❑Forwarding delay

❑Maximum age time

❑Port priority

❑Force version of STP or normal RSTP

This command can also return the RSTP parameters to their default settings.

Note

You can use this command only if RSTP is the active spanning tree protocol on the switch. See ACTIVATE RSTP on page 393.

Examples

The following command sets the bridge priority to 20480 (increment 5), the hello time to 5 seconds, and the forwarding delay to 20 seconds:

set rstp priority=5 hellotime=5 forwarddelay=20

The following command uses the FORCEVERSION parameter to configure the bridge to use the RSTP parameters but to transmit only STP BPDU packets:

set rstp forceversion=stpcompatible

399