379

Chapter 25

STP Commands
This chapter contains the following commands:
❑ACTIVATE STP on page 380
❑DISABLE STP on page 381
❑ENABLE STP on page 382
❑PURGE STP on page 383
❑SET STP on page 384
❑SET STP PORT on page 387
❑SET SWITCH MULTICASTMODE on page 389
❑SHOW STP on page 391
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S62 Management Software Menus Interface User’s
Guide for background information on the Spanning Tree Protocol
(STP).