Canon RE-350 manual Exposure Commands, Exposure Manual Access To, $10 $ 2A $ 0

3.4 Exposure Commands

Exposure: Manual Access To

•Function:

Sets a designated exposure position, which is determined by the parameter of this command. The result is the same as rotating the manual control knob on the front panel.

Note:

The control knob’s physical position is not updated by this command.

This command simply modifies the target exposure default value which is $80.

•Available parameter value:

LSH: $ 00 (darker)~ $ FF (brighter)

•Timing of the “C-response Packet” sent to the PC: Right after the Manual Exposure command is performed.

•The parameter of the “C-response Packet”: $0000 fixed

•The maximum operation time (msec): 500 millisecond

•Command format:

Header ID number Command Parameter MSH Parameter LSH

$10

$ 8 *

$ 2A

$ 0 0

$* *

34