Canon RE-350 manual LED Normal, Input select, Focus Auto

LED: Normal

•Function:

The LED indicated by the parameter data will be set to normal operation. This command is available in the

[NOTIFICATION] Mode. If the RE-350receives this command from the PC in another mode, the RE-350will send a “C-response Packet” with the Mode Error response.

•The available parameter value: LSH: $00 ~ $FF

•Timing of the “C-response Packet” sent to the PC: Right after this setting is done.

•The parameter of the “C-response Packet”: $0000 fixed

•The maximum operation time (msec): 500 millisecond

•Command format:

Header ID number Command Parameter MSH Parameter LSH

$10

$ 8 *

$ 6 8

$ * *

$ 0 0

•The bit assignment for the parameter data:

Each bit corresponds to each LED on the operation panel.

D15	D14	D13	D12	D11	D10	D9	D8
RS-232	Input select	NEGA	WB Auto	B/W	Focus Auto	Lights	Backlight

41