Canon Data Packet Configuration, Control Command Packet Format PC - RE-350, Header, ID number

1.8 Data Packet Configuration

Control Command Packet Format (PC —> RE-350)

The PC can request an operation from the RE-350using this command.

Header	ID number	Command number		Parameter
10h	* *h	* *h	MSH		LSH

C-Response Data Packet Format (PC <— RE-350)

The PC can determine whether the RE-350could perform and finish an operation command given to it by the PC or failed to perform the operation command given to it by the PC.

Header	ID number	Response number	Parameter
A0h	* *h	* *h	MSH	LSH

Event Data Packet Format (PC <— RE-350)

When the RE-350's {RS-232} button is pushed, the RE-350will send this packet to the PC.

Header	ID number	Event number	Parameter
20h	* *h	* *h	MSH	LSH

E-Response Data Packet Format (PC —> RE-350)

When the PC receives the “Event Data Packet” from the RE-350, the PC should respond to the RE-350with this data packet.

Header	ID number	Response number	Parameter
B0h	* *h	* *h	MSH	LSH

FP Data Packet Format (PC <— RE-350)

In [NOTIFICATION] Mode, the RE-350can notify the PC of the condition of each button					and LED using this data
packet.
	Header	ID number	FP data number	Parameter
	30h	* *h	* *h	MSH	LSH

16