Canon Operational Procedures Overview, Operations, RE-350s Condition and LED Status, Order

1.3Operational Procedures Overview

1.3.1Procedure for using the Front Panel

Order	Operations		RE-350's Condition and LED Status
1	With the shutter speed
	switch, set the proper
	shutter of the RE-350.
2	Turn on the main power.	1.	The power LED on the RE-350will be turned on
		2.	Automatically the RE-350will be initialized.
		3.	The White Balance will be adjusted automatically and the White balance
			LED will blink while finding a proper white balanced setting. If the RE-
			350 can not find a proper setting, the White Balance LED will be off, if
			setting is found, the LED will be on.
		4.	The RE-350will start to find the point of focus, the Auto Focus LED will
			be blinking. Once the appropriate point of focus is found, the Auto Focus
			LED will be on, if not, the LED will be off.
3	Operate designated	The RE-350will operate according to the condition of the switches.
	switches.
4	Turn off the main power.	The RE-350will be turned off and every LED will be off.

9