Grill Preparation for USE

MANUAL AND STANDARD GRILLS ONLY (DO NOT USE FOR CHROME GRILL)

Conditioning Instructions - MG & SG Models ONLY

1.Upon examination of your grill you will notice that the grill plate is covered with a protective grease. To remove this grease, turn grill thermostats to about 250°F setting (or low setting on manually operated grills). As the grill plate warms up, carefully wipe the rust preventative grease off of the grill plate and side and rear splash plates with a soft cloth.

2.When cleaning has been completed, apply a film of cooking oil to the grill plate with a small amount of salt. Allow plate to season for about 1 hour at 250°F while rubbing oil and salt into the grill surface. Add oil and salt as required on any “dry spots” that appear during this seasoning process.

3.After 1 hour at 250°F, advance the thermostat setting to 300°F. Continue use of salt and oil for about 1 hour at 300°F. At the end of 1 hour at 300°F, a light tan uniform coating should be present on the

top surface of the grill plate. If it has not developed, continue seasoning process as above at 350°F until coating is formed.

Note: On manually operated grills, keep the grill on low setting during entire seasoning process.

Following initial “Conditioning” of the grill plate, the thermostats may be set to the desired temperature.

CHROME GRILL

Conditioning Instructions - SGC Models ONLY

1.Spread a coating of cooking oil evenly over the surface of the grill. Set the thermostats to 350°F and allow to heat for 1 hour.

2.Using the scraper provided, remove any carbonized material before cooking.

GRILL SHUT DOWN PROCEDURE

1.To turn the grill off, turn the gas control valve to the “Pilot” position. To extinguish the pilot burners, turn to the “Off” position.

2.If burner flames are accidentally extinguished or the safety shutoff valves closes due to pilot failure, turn all valves off. Allow the unit to vent for at least 5 minutes before attempting to re-light.

MG, SG, SGC specifications

Anetsberger Brothers has long been recognized for its innovative approach in the field of precision manufacturing. Among their notable products are the MG, SG, and SGC series, each designed with unique features and capabilities that cater to different industrial needs.

The MG series, known for its robust construction and versatility, offers a range of models that excel in both precision and durability. With high-speed operation and an intuitive interface, the MG series is particularly suited for production lines where efficiency is paramount. These machines are equipped with state-of-the-art CNC technology, allowing for intricate designs and exact specifications. Additionally, the MG series features advanced cooling systems to maintain optimal performance during prolonged usage, ensuring consistent output quality.

Moving on to the SG series, these machines are tailored for high-volume production with an emphasis on speed without compromising quality. The SG series is equipped with an advanced servo drive system that enhances operational efficiency, permitting rapid changes in production setups. Anetsberger Brothers incorporates smart sensors in the SG models, enabling real-time monitoring and adjustments to various parameters, further improving accuracy and reducing waste. The SG series also emphasizes user-friendly controls, making it accessible even for operators with minimal training.

The SGC series takes innovation a step further with its smart technology integration. This series is designed for industries seeking not only productivity but also connectivity. The SGC machines come equipped with IoT capabilities, allowing for seamless integration into smart factories. Their ability to connect with cloud-based systems provides valuable data analytics that can drive decision-making. Moreover, the SGC models emphasize energy efficiency, incorporating sustainable practices that appeal to environmentally conscious manufacturers.

Across the MG, SG, and SGC series, Anetsberger Brothers maintains a commitment to high-quality materials and craftsmanship. Each model is rigorously tested for reliability and performance, ensuring they meet the demands of various industrial applications. The company’s focus on customer feedback has driven continuous enhancement, ensuring that every new iteration of its machines is equipped with the latest technologies and features.

In conclusion, Anetsberger Brothers’ MG, SG, and SGC series represent a blend of tradition and innovation. With their unique features, technological advancements, and commitment to quality, these machines stand ready to meet the challenges of modern manufacturing, making them a valuable addition to any production facility. Whether businesses prioritize speed, versatility, or smart technology, Anetsberger Brothers has a tailored solution to meet those needs.

Anetsberger Brothers MG, SG, SGC warranty Grill Preparation for USE, Grill Shut Down Procedure

Models: MG, SG, SGC