SECTION 3
OPERATION
Oven Control Panel
Conveyor Speed Indicator (Tri Tandem / Quad Tandem version shown)
Conveyor Speed Controller (Tri Tandem / Quad Tandem version shown)
0 | I | 0 | I | 0 | I |
Middleby Marshall
ALM | 260 | C |
| ||
HEAT 1 |
| |
|
|
S E T P T
Service Key |
Blower | Heat |
| Temperature |
Conveyor | Controller | ||
Switch | Switch |
| |
|
| Switch |
|
RESET
Lighted Ignition
Reset Switch
Figure 3-6. Control Panel
III. STEP-BY-STEP OPERATION
A. Startup Procedure
1.Turn on the main disconnect switch / circuit breaker.
2.Open the manual gas supply valve.
3.Turn the blower switch 
to "I" (on)
4.Set the temperature controller to the desired baking temperature. (Refer to paragraph B for Temperature Controller Operating Instructions.)
