Middleby Cooking Systems Group PS360/PS360WB manual Outer Plate Disassembly

SECTION 4

MAINTENANCE

3.After removing each air finger, place it in an upright position to remove the outer plate . Gently, step on the lip of the finger manifold and pull the outer plate upward to disassemble it, as shown in Figure 4-11.

Figure 4-11. Outer Plate Disassembly

NOTE: The outer plate is stainless steel and may be cleaned by either soaking in a hot, strong detergent solution or using a caustic cleaner.

The conveyor belt can also be cleaned in the same way.

4.To remove an inner plate, pull its end away from the finger manifold, then, lift it out and up, as shown in Figure 4-12.

Figure 4-12. Inner Plate Disassembly

CAUTION: DO NOT use caustic cleaner on an inner plate or a finger manifold, to avoid damage.

5.While the oven chamber is clear, clean it with a vacuum cleaner; then, wipe it with a damp cloth.

CAUTION: DO NOT USE A CAUSTIC

CLEANER OR EXCESSIVE WATER WHEN

CLEANING THE INTERIOR OF THE OVEN

CHAMBER.

When cleaning the oven, a non-caustic cleaner, which removes baked-on grease and carbon from metal and glass and will not damage the aluminum coating on the interior oven surface, is recommended.

4-7