Middleby Cooking Systems Group PS360/PS360WB manual 25a, Installing the Conveyor Frame and Belt

SECTION 2

INSTALLATION

INSTALLING THE CONVEYOR FRAME AND BELT

FOR ALL TYPES OF OVENS, ENSURE THAT THE DRIVE

SECTION/END OF THE CONVEYOR FRAME IS PLACED ON

THE SAME END OF THE OVEN AS THE CONVEYOR DRIVE

MOTOR.

1.Insert the conveyor frame into the oven as follows:

For a TANDEM or DOUBLE
TANDEM oven, slide the conveyor
frame assembly into either end of	Figure 2-25a
the oven.
	Installing the Conveyor Frame-
	Tandem and Double Tandem Ovens

For TRI TANDEM ovens, slide one center section and one end section of the frame into EACH END of the oven. The four sections should butt against each other.

Figure 2-25b

Installing the Conveyor Frame-

Tri Tandem Ovens

For QUAD TANDEM ovens, slide two intermediate sections and one end section of the frame into EACH END of the oven. Butt the two inner intermediate sections against the transition (center) frame section. The other

frame sections should butt against each other.

Figure 2-25c

Installing the Conveyor Frame-

Quad Tandem Ovens

2-19