Operational Flow Chart, Command, Response | Canon RE-350 specification

1.9 The Operational Flow Chart

There will be three kinds of communication flow between the RE-350and the PC as follows:

Flow Pattern 1: Command Communication Flow Pattern

This flow will be applied when the PC sends a command to the RE-350to request an operation.

RE-350

Command

The RE-350is under operation.

C-response

Flow Pattern 2: Event Packet Flow Pattern

This flow will be applied when the RE-350sends an “Event Data Packet” to the PC to tell that the {RS-232} button on the operation panel was pressed.

PC	RE-350
	Event Data Packet
The PC is under
operation for this data.
E-response

Page 17

Image 17

Canon RE-350 manual Operational Flow Chart, Flow Pattern 1 Command Communication Flow Pattern, Response

Contents

RE-350 Control Interface Command Index Operations and Functions Panel Diagrams Button Description of the Front and Rear Panel FunctionsKey Function Detail Button Power supply Control Knob Digital SwitchesMain power is turned on SCp180 Operations RE-350s Condition and LED Status Operational Procedures Overview Operations Available RE-350will operate according to the givenFront panel PC and the RS-232 LED will blink RS-232 LED remains on Setting the center target value for Auto-White Balance Mode MeaningAdjusting the value of each control knob LineRequest OFF Line Function of RS-232 buttonLineRequest on Line Auto-white balance was adjusted successfully Default Setting of Each Function After Power-OnMeaning of Each LED Status Status Packet Discrimination Code Assignment Control ProtocolID number Parameter Control Command Packet Format PC RE-350 Data Packet ConfigurationResponse Data Packet Format PC RE-350 Event Data Packet Format PC RE-350 Flow Pattern 1 Command Communication Flow Pattern Operational Flow ChartCommand Response Flow Pattern 2 Event Packet Flow Pattern Response data Flow Pattern 3 Notification Mode Flow PatternFP Data Packet Camera Control Commands Table Control Command and Packet Tables LED System Control Commands Table Mode error response System error responseTime out error response Response Data Packet Table Event Description Byte Header ID # Event Data Packet TableParaL Request on line Denied Accepted ParaH ParaL FP Data Packet TableFP data description Byte Zoom Commands Description Command Data PacketWide Zoom Constant Speed $10 $ 0 Tele Zoom Step Tele Zoom Constant Speed Zoom Stop Zoom Access To Position Zoom Request Position Zoom Tele Constant Speed w/ AF † Zoom Wide Constant Speed w/ AF † OP AF Operate Auto Focus Focus Commands$10 $ 1 $ 0 Focus Near Constant Speed Function Focus Near StepFocus Far Constant Speed Focus Stop Focus Far Step White Balance Manual Access To White Balance CommandsOP AWB Operate Auto-White Balance $10 $ 2 $ 0 $10 $ 2A $ 0 Exposure CommandsExposure Manual Access To Detail Manual Access To Detail Commands Set Positive Mode † Positive/Negative CommandsSet Negative Mode † $10 $ 3 $ 0 Set Color Mode Color/B&W CommandsSet B/W Mode $10 $ 4 $ 0 Detailed System Control Commands System Control CommandsSelect Document Video $10 $ 5 $ 0 Document Lights Off † Document Lights On † Backlight Off † Backlight On † $10 $ 6 $ 0 LED Normal LED On $10 $ 6 a $ 0 LED Off $10 $ 6 B $ 0 LED Blink $10 $ 7 $ 0 OFF-LINE ModeON-LINE Mode Notification Mode Status of Group a Maximum operation time msec 100 millisecond Command formatVideo C/M $10 $ 8 $ 0 Input Status of Group BFunction To get the status data of Group B from the RE-350 = on Focus Status of the ButtonsInput RS-232 Auto Backlight Parameter of the C-response Packet MSH $00 fixed Status of WB control knobStatus of EXP control knob Function Gets the position data of the Detail control knob Status of Detail control knobStatus of AWB result Parameter of the C-response Packet Name of the EquipmentVersion of ROM $10 $F F $ 0 Set to Special Mode $10 $F F $ F F Set to Service Mode RS-232C Control Cable Pin Assignment Control Cable Pin Assignments RE-350 RE-350 Control Cable Pin Assignments Pin Dsub RS-232CPage RTS/CTS Flow Control Timing Chart Timing ChartsCommand Mark Duration period Min Max 300ms 200ms 10ms T4-T2 Mark Duration period Min Max RTS flow control timing chart44ms 300ms 58ms 300ms 1000ms 200ms Appendix a Disk Information RE-350 Software Developers Disk Installation RE-350 SDK File Definitions RE-350 Demo Application \APP RE-350 16bit Sample Code \16BITSDK Execute an RE-350commandInitialize communications with the RE-350 Close communications with the RE-350 RE-350 32bit Sample Code \32BITSDK Execute an RE-350 command

Canon RE-350 Operational Flow Chart, Flow Pattern 1 Command Communication Flow Pattern, Response

Models: RE-350