Default Setting of Each Function After Power-On | Canon RE-350

1.4 The Default Setting of Each Function After Power-On

Function	Default Setting
Communication mode	[OFF-LINE] Mode
Input signal selection	Document Camera
Nega/Posi	Positive
White Balance	Locked at the proper white balance
Color / B&W	Color
Focus	Stopped at the maximum focus point
Zoom	Stopped
Document lights	Off
Back light	Off
Electronic shutter speed	Depends upon the setting of the digital switches
Communication speed	Depends upon the setting of the digital switches
ID number	Depends upon the setting of the digital switches

1.5 The Meaning of Each LED Status

	LED	Status	Meaning

	RS-232	on	Communication mode is [ON-LINE] or [NOTIFICATION] Mode.
		off	Communication mode is [OFF-LINE] Mode.
		blink	Communication mode is transferring.	3 Hz
	INPUT SELECT	on	External Video signal is selected.
		off	Document camera signal is selected.
		blink	N.A.
	NEGA	on	Negative video signal is output.
		off	Normal video signal is output.
		blink	N.A.
	WHITE BALANCE	on	The auto-white balance was adjusted successfully.
	AUTO	off	The auto-white balance could not be adjusted.
		blink	Auto-white balance is being adjusted.	3 Hz
	B/W	on	Output video signal is black and white.
		off	Output video signal is color.
		blink	N.A.
	FOCUS AUTO	on	Auto focusing was done successfully.
		off	Auto focusing failed or is in manual focusing mode.
		blink	Auto focus is being adjusted.	3 Hz
	LIGHTS	on	Document Lights are on.
		off	Document Lights are off.
		blink	Document lights are being preheated.	3 Hz

	BACKLIGHT	on	Backlight is on.
		off	Backlight is off.
		blink	N.A.

14

Image 14

Canon RE-350 manual Default Setting of Each Function After Power-On, Meaning of Each LED Status

Contents

RE-350 Control Interface Command Index Panel Diagrams Operations and Functions Button Description of the Front and Rear Panel FunctionsKey Function Detail Button Power supply Control Knob Digital SwitchesMain power is turned on SCp180 Operational Procedures Overview Operations RE-350s Condition and LED Status Operations Front panel PC and the RS-232 LED will blink RE-350will operate according to the givenAvailable RS-232 LED remains on Setting the center target value for Auto-White Balance Mode MeaningAdjusting the value of each control knob LineRequest OFF Line Function of RS-232 buttonLineRequest on Line Meaning of Each LED Status Default Setting of Each Function After Power-OnAuto-white balance was adjusted successfully Status ID number Control ProtocolPacket Discrimination Code Assignment Parameter Response Data Packet Format PC RE-350 Data Packet ConfigurationControl Command Packet Format PC RE-350 Event Data Packet Format PC RE-350 Command Operational Flow ChartFlow Pattern 1 Command Communication Flow Pattern Response Flow Pattern 2 Event Packet Flow Pattern Response data Flow Pattern 3 Notification Mode Flow PatternFP Data Packet Control Command and Packet Tables Camera Control Commands Table System Control Commands Table LED Time out error response System error responseMode error response Response Data Packet Table ParaL Event Data Packet TableEvent Description Byte Header ID # Request on line Accepted Denied ParaH ParaL FP Data Packet TableFP data description Byte Wide Zoom Constant Speed Description Command Data PacketZoom Commands $10 $ 0 Tele Zoom Constant Speed Tele Zoom Step Zoom Access To Position Zoom Stop Zoom Request Position Zoom Wide Constant Speed w/ AF † Zoom Tele Constant Speed w/ AF † $10 $ 1 $ 0 Focus CommandsOP AF Operate Auto Focus Focus Near Constant Speed Function Focus Near StepFocus Far Constant Speed Focus Far Step Focus Stop OP AWB Operate Auto-White Balance White Balance CommandsWhite Balance Manual Access To $10 $ 2 $ 0 $10 $ 2A $ 0 Exposure CommandsExposure Manual Access To Detail Commands Detail Manual Access To Set Negative Mode † Positive/Negative CommandsSet Positive Mode † $10 $ 3 $ 0 Set B/W Mode Color/B&W CommandsSet Color Mode $10 $ 4 $ 0 Select Document Video System Control CommandsDetailed System Control Commands $10 $ 5 $ 0 Document Lights On † Document Lights Off † Backlight On † Backlight Off † LED Normal $10 $ 6 $ 0 LED On LED Off $10 $ 6 a $ 0 LED Blink $10 $ 6 B $ 0 $10 $ 7 $ 0 OFF-LINE ModeON-LINE Mode Notification Mode Video C/M Maximum operation time msec 100 millisecond Command formatStatus of Group a $10 $ 8 $ 0 Function To get the status data of Group B from the RE-350 Status of Group BInput = on Input RS-232 Auto Status of the ButtonsFocus Backlight Parameter of the C-response Packet MSH $00 fixed Status of WB control knobStatus of EXP control knob Function Gets the position data of the Detail control knob Status of Detail control knobStatus of AWB result Parameter of the C-response Packet Name of the EquipmentVersion of ROM Set to Special Mode $10 $F F $ 0 Set to Service Mode $10 $F F $ F F Control Cable Pin Assignments RS-232C Control Cable Pin Assignment RE-350 Control Cable Pin Assignments Pin Dsub RS-232C RE-350Page Command Timing ChartsRTS/CTS Flow Control Timing Chart Mark Duration period Min Max 300ms 200ms 10ms T4-T2 44ms 300ms RTS flow control timing chartMark Duration period Min Max 58ms 300ms 1000ms 200ms RE-350 Software Developers Disk Installation Appendix a Disk Information RE-350 Demo Application \APP RE-350 SDK File Definitions Initialize communications with the RE-350 Execute an RE-350commandRE-350 16bit Sample Code \16BITSDK Close communications with the RE-350 Execute an RE-350 command RE-350 32bit Sample Code \32BITSDK