Allied Telesis management software layer 2+ fast ethernet switches Reset System, Reset system

Chapter 4: Basic Switch Commands

RESET SYSTEM

Syntax

reset system [name] [contact] [location]

Parameters

name	Deletes the switch’s name.
contact	Deletes the switch’s contact.
location	Deletes the switch’s location.

Description

This command delete’s the switch’s name, the name of the network administrator responsible for managing the unit, and the location of the unit. To set these parameters, refer to SET SYSTEM on page 61. To view the current settings, refer to SHOW SYSTEM on page 69.

Examples

This command deletes all three parameter settings:

reset system

This command deletes just the name:

reset system name

50