AT-S62 Command Line User’s Guide

Examples

In the following command, the SNMPv3 Notify Table entry is called “testengtrap1” and the notify tag is “testengtag1.” The message type is defined as a trap message and the storage type for this entry is nonvolatile storage.

create snmpv3 notify=testengtrap1 tag=testengtag1 type=trap storagetype=nonvolatile

In the following command, the SNMPv3 Notify Table entry is called “testenginform5” and the notify tag is “testenginformtag5.” The message type is defined as an inform message and the storage type for this entry is nonvolatile storage.

create snmpv3 notify=testenginform5 tag=testenginformtag5 type=inform storagetype=nonvolatile

117

Page 117
Image 117
Allied Telesis management software layer 2+ fast ethernet switches manual 117