Allied Telesis management software layer 2+ fast ethernet switches manual Set Acl

AT-S62 Command Line User’s Guide

SET ACL

Syntax

set acl=integer [description=string] [action=denypermit] [classifierlist=integer] [portlist=portsnone]

Parameters
acl	Specifies the ID number of the ACL you want to
	modify. The number can be from 0 to 255. You can
	modify only one ACL at a time.
description	Specifies a new description for the ACL. A description
	can be up to 15 alphanumeric characters. Spaces are
	allowed. If the description contains a space, it must be
	enclosed in double quotes. Otherwise, the quotes are
	optional.
action	Specifies the new action to be taken by the port when
	a ingress packet matches a classifier attached to the
	ACL. Options are:
	permit	The port accepts the packet.
	deny	The port discards the packet, provided that
		the packet does not match the classifier of a
		permit ACL assigned to the same port.
classifierlist	Specifies the new ID numbers of the classifiers to be
	assigned to the ACL. Any classifier IDs already
	assigned to the ACL are overwritten. When entering
	multiple ID numbers, separate the numbers with a
	comma (e.g., 4,6,7). The classifiers must already exist
	on the switch. The order in which you specify the
	classifiers is not important. An ACL must be assigned
	at least one classifier.
portlist	Specifies the new ports to be assigned this ACL. Any
	ports to which the ACL is assigned are overwritten.
	You can assign an ACL to more than one port. When
	entering multiple ports, the ports can be listed

individually (e.g., 2,5,7), as a range (e.g., 8-12) or both (e.g., 1-4,6,8). Entering NONE removes all ports to which the ACL is already assigned without assigning any new ports. An ACL without assigned ports exists, but remains nonfunctional until assigned to a port.

303