Allied Telesis management software layer 2+ fast ethernet switches manual Show snmpv3 group

AT-S62 Command Line User’s Guide

SHOW SNMPv3 GROUP

Syntax

show snmpv3 group username=username [securitymodel=v1v2cv3]

Parameter
username	Specifies a user name configured in the SNMPv3 User
	Table.
securitymodel	Specifies the security model of the above user name.
	The options are:
	v1 Associates the Security Name, or User Name,
	with the SNMPv1 protocol.
	v2c Associates the Security Name, or User Name,
	with the SNMPv2c protocol.
	v3 Associates the Security Name, or User Name,
	with the SNMPv3 protocol.
Description

This command displays SNMPv3 SecurityToGroup Table entries. You can display one or all of the table entries.

Example

The following command displays the SNMPv3 SecurityToGroup Table entry for a user named Dave who is assigned a security model of the SNMPv3 protocol.

show snmpv3 group username=Dave securitymodel=v3

The following command displays all of the SNMPv3 SecurityToGroup

Table entries:

show snmpv3 group

151