| Installation and operation |
| Global Error indicator (orange) |
! | – Lights up orange if a prefailure event has been detected that |
| requires (precautionary) service intervention. |
–Flashes orange if an error was detected that requires service intervention.
–Does not light up if there is no critical event.
If the event is still acute after a power failure, the indicator is activated after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System Event Log (SEL), in the management blade web interface, on the ServerView Local Service Display for Blade, in the ServerView Operations Manager or via the iRMC S2's Web interface.
CSS CSS indicator (yellow)
–Lights up yellow if a prefailure event was detected for a CSS component that you can fix yourself (for reasons of precaution) with the CSS concept.
–Flashes yellow if an error was detected that you can fix yourself with the CSS concept.
–Does not light up when the system is OK.
If the event is still acute after a power failure, the indicator is activated after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see "Customer Self Service (CSS)" on page 13.
ID ID indicator (blue):
Glows blue when the system was selected by pressing the ID button. Pressing the button again deactivates the LED.
The ID indicator can also be activated via the management blade web interface and via the ServerView Operations Manager and its status reported to the ServerView Operations Manager and the iRMC S2.
BX400 S1 | Operating Manual | 59 |
