Fujitsu BX400 S1 Connecting devices to the system unit, Ports on the back of the system unit

Installing the hardware

4.5Connecting devices to the system unit

On the back of the system unit are the ports for the network connection and the administration of the blade server.

Ports on the back of the system unit

MMB 1	MMB 2
CB 1	CB 2
CB 3	CB 4

Figure 8: Ports for external devices (rack version)

CB 1 -4	Slots for connection blades. For information on the ports of the connection
	blades, see "Connection blades" on page 88.
MMB 1,2	The management blades have the following ports
	1	Service LAN port (as a point-to-point connection, for system unit
		administration only, no access to server blades and connection blades)
	2	USB ports for backing up and restoring the MMB configuration and for
		access to logging information
	3	Serial port for a local management console
	4,5	Management LAN ports for blade server management (including server
		blades and connection blades)

IThe service LAN port (pos. 1 in figure 8), the management LAN ports for blade server management (pos. 4 and 5 in figure 8) and the management LAN port of the FSIOM (pos. 3 in figure 9) must be in different LAN subnetworks.

BX400 S1 Operating Manual 49