Installation and operation
5.3Configuring management blades
The two redundant management blades form the central interface for administration of the system unit and all components therein. This section explains how to do the initial configuration of the management blades.
For more information on administration of the blade server, see the manual "PRIMERGY BX400 Blade Server Systems ServerView Management Blade S1 User Interface Description").
Initial configuration with the Base Configuration Wizard
ÊMake sure that the hardware installation of the system unit as described in chapter "Installing the hardware" on page 37.
ÊPress the On/Off button on the ServerView Local Service Display for Blade (position 4 in figure 14 on page 57) to switch on the system unit.
The management blade boots and the ServerView Local Service Display for Blade shows the start menu of the Base Configuration Wizard.
Figure 19: Base Configuration Wizard start menu
ÊSelect YES with the nagivation buttons and press the 
button to start the wizard.
The NO button closes the Base Configuration Wizard, and the Health Status Overview menu is displayed.
68 | Operating Manual | BX400 S1 |
