Installing the hardware
4.7Instructions for connecting/disconnecting cables
VCAUTION!
Please make sure you read the documentation for the devices before you try to connect them.
Do not connect or disconnect any data transmission cables during a thunderstorm.
Always pull cables out by the plug.
When connecting and disconnecting the cables, observe the following order.
Connecting cables
ÊSwitch off all the relevant devices.
ÊUnplug the power plugs of all affected devices from the power outlets or CEE sockets.
ÊConnect all cables to the server and the peripherals. Secure the connectors of the data cables (e.g. by tightening the screws).
ÊPlug all data transmission cables into the sockets provided for the data or telecommunication networks.
ÊPlug all the power plugs into the power outlets or CEE sockets.
Disconnecting cables
ÊSwitch off all the relevant devices.
ÊUnplug the power plugs of all affected devices from the power outlets or CEE sockets.
ÊPull all data transmission cables out of the sockets provided for the data or telecommunication networks.
ÊUndo the screws on the connectors and pull the relevant cables out of the system unit and peripherals.
54 | Operating Manual | BX400 S1 |
