Fujitsu BX400 S1 manual Attaching the support brackets

Installing the hardware

Figure 3: Attaching the support brackets

ÊPosition the support brackets at the relevant height on the rear left support upright (place knob in the corresponding hole) and secure them using four centering screws (1).

ÊFasten the holding-down clamp at the upper end of the support bracket using two centering screws (2).

ÊFasten the second holding-down clamp at the same height as the first one to the rear left support upright using two centering screws.

44 Operating Manual BX400 S1