Fujitsu BX400 S1 manual 3rd party racks

Installing the hardware

IFor 19-inch standard rack (for the Japanese market):

For information on mounting of the rails in the 19-inch standard rack (for the Japanese market) please refer to the next sections.

3rd party racks

Certain general conditions must be met:

–Installation dimensions (see the dimensions shown in figure 2 on page 42):

1 Front of rack

2 Rear of rack

A Rack depth (comparison PRIMECENTER Rack 940/1000/1100 mm)

B Rack width (comparison PRIMECENTER rack 700 mm)

C Clearance for 19" installation level C1 Front 19" installation level

C2 Rear 19" installation level

D Cable routing area (cable area depth) and ventilation

E Space for front panel and ventilation

F Space for right and left support systems

P PRIMERGY server installation depth a1 Front left support upright

a2 Front right support upright

b1 Rear left support upright

b2 Rear right support upright

BX400 S1 Operating Manual 41