Fujitsu BX400 S1 manual Connection Blade 8Gb FC Pass Thru 18/18

Hot-plug components

8.2.7Connection Blade 8Gb FC Pass Thru 18/18

The 8-Gb FC Pass Thru Connection Blade 18/18 provides the following connections:

–18 internal 8-Gbit ports to the server blades

–18 external Fibre Channel ports via 4-Gbit SFP or 8-Gbit SFP+ modules

This connection blade can be used in slots CB 2, CB 3 and CB 4, see figure "Connection blade slots" on page 108. It only supports server blades that are fitted with a Fibre Channel mezzanine card. For more information, see the operating manuals for the relevant server blades.

Ports and LEDs

1 2 3 B

		A
Figure 32: 8-Gb FC Pass Thru Connection Blade 18/18
1	ID indicator (blue)
ID	Lit:	ID LED was activated via the management blade
2	Status indicator (green/orange)
	Dark:	Connection blade is powered off
	Lights up green:	Connection blade is powered on, status OK
	Flashes orange:	Connection blade is powered on, status fail
3	Status indicators for external FC ports (green)
	Lit:	FC link up
A, B	External FC ports (A: 1-12, B: 13-18, from left to right)
	Ports for FC SFP Multi-Mode (MMF) 4Gbit/s or FC SFP+ Multi-Mode (MMF) 8Gbit/s

104 Operating Manual BX400 S1