Fujitsu BX400 S1 manual Fiber Channel connection blades

Introduction

–Connection Blade 1GbE Switch/IBP 18/6 (SB 6)

–18 internal 1-Gbit ports to the server blades

–6 external 1-Gbit ports through SFP+ modules or active twinax cables (copper)

IThis connection blade can be used in all connection blade slots.

–Connection Blade 10 GbE Switch/IBP 18/8

– 18 internal 10-Gbit ports to the server blades

– 8 external 10-Gbit ports through SFP+ modules or active twinax cables (copper)

IThis connection blade can be used in all connection blade slots.

10 GbE connection blades in slots CB2 (fabric 2) and CB3/4 (fabric 3) only support server blades that are fitted with a 10 Gbit Ethernet mezzanine card (see also section "Fitting rules for connection blades" on page 108).

–Connection Blade Ethernet Pass Thru 10Gb 18/18

– 18 internal 1/10-Gbit ports to the server blades

– 18 external 1/10-Gbit ports through SFP/SFP+ modules

IThis connection blade can be used in all connection blade slots.

If the connection blade is installed in one of the slots CB 1 or CB 2, 16 ports are available. If the connection blade is installed in one of the slots CB 3 or CB 4, 8 ports are available (see also "Port assignment" on page 101).

●Fiber Channel connection blades

–Connection Blade 8Gb FC Switch 18/8

– 18 internal 8-Gbit ports to the server blades

– 8 external ports through 8-Gb SFP+ modules or 4-Gb SFP modules This connection blade is available in three license variants:

– Brocade 5450 with 14-port license

– Brocade 5450 with 26-port license (applies only to EMEA market)

– Brocade 5450 with 26 port license and performance bundle (applies only to EMEA market)

BX400 S1 Operating Manual 15