Fujitsu BX400 S1 manual Removing the separating clip

Hot-plug components

Installing a double-width connection blade (Infiniband)

VCAUTION!

Make sure you observe the safety notes and the information on handling electrostatic-sensitive devices in the section "Modules with Electrostatic- Sensitive Devices" on page 32.

ÊUnpack the Infiniband connection blade.

Figure 39: Removing the separating clip

IBecause of the double width of these connection blades, you must remove the separating clip between the two slots of fabric 3 before you install the connection blade.

ÊRemove the separating clip by pressing the little black lever (1) to the left and pulling out the separating clip (2).

116 Operating Manual BX400 S1