Important notes
VCAUTION!
●Make sure that the power sockets on the device or the grounded mains outlets are freely accessible.
●The On/Off button or the main power switch (if there is one) does not disconnect the device from the mains voltage. To completely disconnect it, you must remove all the power plugs from the power outlets.
●Always connect the device and the attached peripherals to the same power circuit. Otherwise you run the risk of losing data if, for example, a power outage occurs and the server is still running but the peripheral device (e.g. a storage subsystem) has failed.
●Data cables must be adequately shielded to avoid interference.
●For the LAN wiring, the requirements according to standards
EN 50173 and EN
●Route the cables in such a way that they do not form a potential hazard (tripping) and cannot be damaged. When connecting the device, refer to the relevant notes in the operating manual.
●Do not connect or disconnect any data transmission cables during a thunderstorm (lightning hazard).
●Make sure that no objects (such as bracelets or paper clips) or liquids get inside the device (risk of electric shock or short circuit.
●In emergencies (e.g. damaged casing, control elements or power cable, penetration of liquids or foreign bodies), switch off the device immediately, unplug it from the grounded power outlets, and contact your customer service center.
BX400 S1 | Operating Manual | 27 |
