![](/images/new-backgrounds/1158792/158792223x1.webp)
Hot-plug components
8.2.11 Installing a connection blade
VCAUTION!
Note the safety instructions and the information on handling electrostatically sensitive devices in section "Safety instructions" on page 25.
Removing dummy module(s)
Any unused connection blade slots are fitted with appropriate dummy modules to comply with electromagnetic compatibility (EMC) regulations and to ensure sufficient cooling of the system components.
Figure 35: Dummy connection blade module
To add connection blades, you must first remove the dummy modules from the relevant slots.
112 | Operating Manual | BX400 S1 |