Table
Feature | Status | Comments |
Paper (Media) Source | Modified | Additional parameters have been added to provide support |
|
| for Tray 1, the printer’s right side |
|
| the other optional trays (see the description of this |
|
| command in the following paragraphs). |
Output Bin | Modified | The Output Bin command (?&l#G) selects the destination |
|
| bin for the print job. |
Alphanumeric ID | New | Specifies alphanumeric String IDs for selecting and |
|
| manipulating fonts, macros, and media types. Specifies |
|
| media selection by the type of media and supports |
|
| enhancements for the printer disk drive. |
|
|
|
Paper (Media) Source Command
Descriptions of the Paper (Media) Source, Output Bin, and Alphanumeric ID commands are provided below.
The Paper (Media) Source command selects the specified input media source. Parameters have been added to enable printing from the LaserJet 5Si/5SiMx printer trays.
?&l#H
#= 0 - Print current page (source is unchanged) 1 - Tray 2 (upper drawer)
2 - Manual feed (tray 1, right side tray)
3 - Manual envelope feed (tray 1, right tray)
4 - Tray 3 (lower drawer)
5 - High Capacity Input (HCI), first tray
6 - Optional envelope feeder
7 - Autoselect
8 - Tray 1 (right side tray)
20 - 39 - High Capacity Input (HCI) trays 2- 21 Default = 7
Range = 0 to 8, 20 - 39
