Configuration Command (AppleTalk)

The Configuration command allows a user to send PCL jobs to the printer over AppleTalk. This data is sent in the form of “key/value” data pairs (refer to “AppleTalk Configuration” below for more information).

?&b#W [key]<sp>[value]

#= Number of data bytes that follow command

Default = 0

Range = 0 - 32767

[key] can be 1 character through 32765 characters. [value] can be 1 character through 32765 characters.

AppleTalk Configuration

The HP LaserJet 4 printer can be configured to receive PCL print jobs over an AppleTalk connection using the Configuration command. The HP LaserJet 4 MIO AppleTalk interfaces support three key values: RENAME, JOB, and TYPE. These keys are used for configuring an installed LocalTalk or EtherTalk MIO card to allow PCL print jobs generated by a Macintosh host to be printed.

Printer-Specific Differences 2-7

Page 43
Image 43
HP L5 manual Configuration Command AppleTalk, AppleTalk Configuration