![](/images/new-backgrounds/1333090/333090129x1.webp)
Merge Control Command (HP-GL/2)
Merge Control Command
The Merge Control (MC) command specifies the raster operation (ROP’s) to be performed in
MC [mode, [opcode] ] ;
Parameter | Format | Functional Range | Default |
mode | clamped integer | 0 or 1 | 0 (ROP 252) |
opcode | clamped integer | 0...2551 | 168, 252 |
1For opcode ROP values refer to Table
mode
0= opcode value is ignored; printer sets ROP to 252.
1= opcode value is used as the ROP value. If no opcode value is sent, printer sets ROP to 168. If opcode is out of range (some value other then
Notes This command is the
This command sets a ROP value which affects not only
The MC command is defaulted by an IN command.