Q-Logic QLA2342, SB2A-16B manual Zone Command, Syntax zone

B – Command Line Interface	0
Zone Command

Zone Command

Manages zones and zone membership on a switch.

Authority Admin session and a Zoning Edit session. Refer to the ”Zoning Command” on page B-96for information about starting a Zoning Edit session. The List, Members, and Zonesets keywords are available without an Admin session.

Syntax zone

add [zone] [member_list]

copy [zone_source] [zone_destination] create [zone]

delete [zone] list

members [zone]

remove [zone] [member_list] rename [zone_old [zone_new] type [zone] [zone_type] zonesets [zone]

Keywords add [zone] [member_list]

Specifies one or more ports/devices given by [members] to add to the zone named [zone]. Use a <space> to delimit aliases and ports/devices in [member_list]. A zone can have a maximum of 2000 members. [member_list] can have any of the following formats:

„Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–-239; port numbers can be 0–-255.

„6-character hexadecimal device Fibre Channel address (hex)

„16-character hexadecimal worldwide port name (WWPN) with the format xx:xx:xx:xx:xx:xx:xx:xx.

„Alias name

The application verifies that the [members] format is correct, but does not validate that such a member exists.

copy [zone_source] [zone_destination]

Creates a new zone named [zone_destination] and copies the membership into it from the zone given by [zone_source].

create [zone]

Creates a zone with the name given by [zone]. An zone name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -. The zoning database supports a maximum of 1000 zones.

delete [zone]

Deletes the specified zone given by [zone] from the zoning database. If the zone is a component of the active zone set, the zone will not be removed from the active zone set until the active zone set is deactivated.

B-90 59021-09 A