Q-Logic QLA2342 Config Command, Syntax config, activate configname backup, edit configname list

B – Command Line Interface	0
Config Command

Config Command

Manages the Fibre Channel configurations on a switch. For information about setting the port and switch configurations, refer to the ”Set Config Command” on page B-33.

Authority Admin session for all keywords except List

Syntax config

activate [config_name] backup

cancel

copy [config_source] [config_destination] delete [config_name]

edit [config_name] list

restore

save [config_name]

Keywords activate [config_name]

Activates the configuration given by [config_name]. If you omit [config_name], the currently active configuration is used. Only one configuration can be active at a time.

backup

Creates a file named configdata, which contains the system configuration information. To download this file, open an FTP session, log in with account name/password of “images” for both, and type “get configdata”. Refer to ”Backing up and Restoring Switch Configurations” on page B-3.

cancel

Terminates the current configuration edit session without saving changes that were made.

copy [config_source] [config_destination]

Copies the configuration given by [config_source] to the configuration given by [config_destination]. The switch supports up to 10 configurations including the default configuration.

delete [config_name]

Deletes the configuration given by [config_name] from the switch.

edit [config_name]

Opens an edit session for the configuration given by [config_name]. If you omit [config_name], the currently active configuration is used.

list

Displays a list of all available configurations on the switch. This keyword does not require an admin session.

B-10 59021-09 A