HP L5 manual HP LaserJet IIISi Printer, HP LaserJet Iiip Printer, Feature Status Comments

HP LaserJet IIISi Printer

Several new PCL features were added to the PCL 5 language with the release of the HP LaserJet IIISi printer. These new features are summarized in Table 2-1 below.

Table 2-1. PCL Feature Additions for HP LaserJet IIISi Printer

Feature	Status	Comments
Number of Copies	Modified	Greater range, 1 to 32,767.
Page Size	Modified	C5 Envelopes not supported.
Output Bin Selection Command	New	Allows programmatic selection of upper or lower
		output paper bins.
End Raster Graphics Command	New/Modified	Modified version of the existing End Raster
		Graphics command.
Job Separation	New Command	Causes the paper stacker to shift positions to
		offset the output paper stack.
Fonts	New Additions	Four variations of Univers Condensed; ITC Zapf
		Dingbats in five symbol sets.

HP LaserJet IIIP Printer

Several new PCL features were added to the PCL 5 language with the release of the HP LaserJet IIIP printer. These new features are summarized in Table 2-2. One new feature listed here is adaptive compression (method 5) for the Raster Compression Mode command. In addition to compressing data for transmission, if certain rules are followed (discussed below), the HP LaserJet IIIP printer will store adaptive compressed data in compressed format and only decompress it when required for printing. There are certain requirements which must be met for this data to be stored in compressed format. These requirements are discussed following Table 2-2.

2-2 Printer-Specific Differences