Saving a feature and light in memory keys
You can make the set indicator light come ON when you turn a feature ON and go OFF when you turn that same feature OFF. You can only do this with one feature. This works well with any service that has separate ON and OFF codes such as Call Forwarding.
For example, you may want the light to remind you that you have turned Call Forwarding ON. To do this, use one key to turn the indicator light ON when you activate the feature. Use the sec- ond key to turn the indicator light OFF when you deactivate that same feature. The following procedure shows you how to program a FeatureLight ON and OFF key.
To save a FeatureLight ON key:
1.Press §. Do NOT select a memory key yet.
2.To program the light ON, press Ú.
3.Press the desired memory key.
4.Enter the telephone company feature code for turning the feature ON.†
5.Read the display to confirm the number.
6.Press §.
7.Label the memory key.
(See the diagram on page 17.)
To save a FeatureLight OFF key:
1.Press §. Do NOT select a memory key yet.
2.To program the light OFF, press â.
3.Press the desired memory key.
4.Enter the telephone company feature code for turning the feature OFF.†
5.Read the display to confirm the number.
6.Press §.
7.Label the memory key.
(See the diagram on page 17.)
†Note: Contact your telephone company or Telecom manager for the appropriate feature codes.
Using FeatureLight keys
To turn a feature and light ON or OFF:
1.Press the memory key where you stored the FeatureLight. The display shows FeatureLight ON or FeatureLight OFF.
2.Lift the handset or press either ©, ¶, or Â.
The feature and light turn ON or OFF. (When the feature and light are ON and you’re not using the telephone, the display shows Feature ON and the line that it applies to as a reminder.)
19
