Aastra Telecom 8417 Deleting memory keys, Saving features in memory keys, Using feature keys

Deleting memory keys

To delete a memory key:

1.To see its contents, press the memory key.

2.To erase, press £twice.

Note: The Live dial pad option must be turned OFF to edit memory keys.

Saving features in memory keys

For easy access, you can save the feature codes of telephone company services in your memory keys. This works well with network features such as Call Forwarding, Call Screen, and Call Return. Some features require an ON and OFF code in two separate keys, while other features are stored on only one key. The following procedures show you how to save both an ON and OFF code.

To save a feature ON code:

1.Press §.

2.Press the memory key where you want to save the number.

3.Enter the telephone company feature code for turning the feature ON.†

4.Read the display to confirm the number.

5.Press §.

6.Enter the feature name using the dial pad. (See Entering Names on page 14.)

7.Press §.

8.Label the memory key. (See the diagram on page 17.)

To save a feature OFF code:

1.Press §.

2.Press the memory key where you want to save the number.

3.Enter the telephone company feature code for turning the feature OFF.†

4.Read the display to confirm the number.

5.Press §.

6.Enter the feature name using the dial pad. (See Entering Names on page 14.)

7.Press §.

8.Label the memory key. (See the diagram on page 17.)

†Note: Contact your telephone company or Telecom manager for the appropriate feature codes.

Using feature keys

When a memory key is programmed with a feature code, you can use the memory key to activate or deactivate the feature.

To turn a feature ON or OFF:

1.Press the memory key where you stored the desired feature. The display shows the feature name and code.

2.Lift the handset or press either ©, ¶, or Â.

The feature code is dialed out, which turns the feature ON or OFF.

Note: The active feature applies only to the line you selected or to the prime line if you did not press a line key. For example, if you want to forward all incoming calls, you must turn the feature ON for each line.

18