NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

Set Up Your Wireless Network

To set up the wireless network, you can enter wireless settings, or you can use Wi-Fi Protected Setup (WPS). To wirelessly connect to the gateway, a computer or wireless device must be configured with the same wireless settings as the gateway.

Configure Wireless Settings Manually

You can manually configure the wireless settings and security in the Wireless Settings screen.

To view or configure the wireless settings:

1.If you are located near the gateway, use an Ethernet cable to connect your computer to the gateway while you are changing the wireless settings.

Note: If you connect wirelessly to the gateway and then change its wireless network name (SSID) or wireless security, you will be disconnected after you click Apply.

2.Log in to the gateway.

For more information, see Log In to Your Gateway on page 10.

3.In the main menu, under Setup, select Wireless Settings. The following screen displays.

Configuring Your Wireless Network

13

Page 13
Image 13
NETGEAR CG3000Dv2 user manual Set Up Your Wireless Network,  To view or configure the wireless settings