NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

Enable Network Address Translation

Network Address Translation (NAT) provides one-to-many translation of IP addresses between devices. This means that your network presents only one IP address to the Internet, and outside users cannot directly address any of your local computers. Enable NAT to allow multiple computers on your network to access the Internet using a single public IP address. NAT is enabled by default.

To disable NAT:

1.In the main menu, under Advanced, select NAT.

2.Deselect the Turn NAT On box.

3.Click Apply.

Remove USB Devices

To remove a USB device:

1.In the main menu, under USB Storage, select Basic Settings.

2.Click Safely Remove USB Device.

Advanced Settings

47

Page 47
Image 47
NETGEAR CG3000Dv2 Enable Network Address Translation, Remove USB Devices,  To disable NAT,  To remove a USB device