NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway
For example, some systems tracking the performance of the broadband connections in terms of latency and packet loss need the gateway to reply to ping requests.
3.Type the last digits of the IP address in the DMZ Address field. The DMZ host feature is disabled when the last digit is zero.
4.Click Apply.
LAN IP Setup
The LAN IP screen allows you to configure LAN services such as the IP address of the gateway and DHCP. The TCP/IP and DHCP default values work fine in most cases.
Note: If you disable the DHCP server, assign to your computer a static IP address to reconnect to the gateway and enable the DHCP server again.
To configure LAN IP settings:
1.In the main menu, under Advanced, select
LAN IP.
2.Specify these settings:
•LAN IP Address. The factory default setting is 192.168.0.1.
•Subnet Mask. The network number portion of an IP address. Unless you are implementing subnetting, use 255.255.255.0 as the subnet mask.
•DHCP Server. The Yes radio button is selected by default so the gateway acts as a DHCP server, providing the TCP/IP configuration for all the computers connected to it.
If you plan to assign IP addresses manually, or you have another DHCP server on your network, select the No radio button.
•Starting IP Address and Ending IP Address. These fields specify the range in the IP address pool.
•Max Users. The maximum number of users on the network.
Advanced Settings
43
