NETGEAR CG3000Dv2

Configuring Your Wireless Network

NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway

If it works with WPS, it has a WPS utility and might also have a WPS button that you can

press.

2. Log in to the gateway.

For more information, see Log In to Your Gateway on page 10.

3. In the main menu, select Add WPS Client.

The following screen displays.

4. Click Next.

The Add WPS Client screen displays:

5. Either click the WPS button, or press the button on the front of the gateway.

•The WPS LED on the front of the gateway begins to blink.

•The gateway tries to communicate with the wireless computer or device for 2 minutes.

•If the security option in the Wireless Settings screen was set to Disable, it is

automatically changed to WPA-PSK [TKIP] + WPA2-PSK [AES], including a random

wireless security password.

6. Go to the wireless computer, and run its WPS configuration utility.

7. To click the WPS button, follow the utility’s instructions.

Contents

Main Page Contents Chapter 1 Connecting to the Internet Chapter 2 Configuring Your Wireless Network Chapter 3 Filtering Content Chapter 4 Maintaining Your Network Chapter 6 Troubleshooting Appendix A Supplemental Information Appendix B Notification of Compliance Page Gateway Front Panel Connecting to the Internet NETGEAR DOCSIS 3.0 N450 Wi-Fi Data Gateway Gateway Rear Panel Label Wireless Performance and Gateway Location Log In to Your Gateway View Basic Settings Page Set Up Your Wireless Network Configure Wireless Settings Manually Page Use Push 'N' Connect (WPS) Wireless Setup Add a Client Using the WPS Button Page Add a Client Using a PIN Set Up Wi-Fi Multimedia Change the Password Page Page View Denial of Service (DoS) Attack Logs Limit Internet Site Access Allow Unrestricted Access Disable Gateway Features Page Page Page View the Gateway Status View the Connection Status Back Up and Restore Your Settings View the Event Log Run the Diagnostic Utilities Ping Utility Page Traceroute Utility Page Advanced Wireless Settings MAC Filtering Page IP Filtering Port Blocking Port Forwarding Page Port Triggering DMZ Host LAN IP Setup Reserve an IP Address for DHCP Use LAN Switch Configure Universal Plug and Play (UPnP) Set Networking Protocols Enable Network Address Translation Remove USB Devices Page Basic Functions Connect to the Gateways Main Menu Troubleshoot the ISP Connection Troubleshoot a TCP/IP Network Using a Ping Utility Test the LAN Path to Your Gateway Test the Path from Your Computer to a Remote Device Page Page Supplemental Information Factory Default Settings Table 2. Factory default settings Supplemental Information Technical Specifications The following table describes the technical specifications for the gateway. Table 3. Technical specifications Page B B. Notification of Compliance Regulatory Compliance Information Europe EU Declaration of Conformity FCC Requirements for Operation in the United States FCC Information to User FCC Guidelines for Human Exposure FCC Caution Canadian Department of Communications Radio Interference Regulations Industry Canada Caution: Notification of Compliance Avertissement: IMPORTANT NOTE: Radiation Exposure Statement: NOTE IMPORTANTE: Dclaration d'exposition aux radiations: Interference Reduction Table