ES4710BD 10 Slots L2/L3/L4 Chassis Switch
no
[interface
Function: Adds or modifies static address entries, the “no
Parameters: static stands for static address entry; dynamic for dynamic address entry;
Command mode: Global Mode
Default: When configuring a VLAN interface, the system will generate a static address mapping entry for a system inherent MAC address and the VLAN number.
Usage Guide: For special purposes or if the switch can not learn MAC address dynamically, the user can use this command to establish mapping relationships between MAC addresses and ports/VLAN.
“no
Example: Port 1/1 belongs to VLAN200, set a mapping to MAC address
8.2.3mac-address-table blackhole
Command:
Function: Adds or modifies filter address entries, the “no
Parameters: blackhole stands for a filter entry, filter entries are configured to discard frames of specified MAC addresses, so that traffic can be filtered. Both source addresses and destination addresses can be filtered.
Command mode: Global Mode
Usage Guide: “no
entries in the switch MAC table.
Example: Setting
8.3Typical Configuration Examples
184
