Accton Technology ES4710BD manual Dvmrp Configuration Commands, Metricval

ip dvmrp report-interval <time_val> no ip dvmrp report-interval

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

Sets the interval for sending DVMRP report messages; the “no ip dvmrp report interval” command restores the default setting.

d. Configuring DVMRP route timeout time

CommandExplanation

Global Mode

ip dvmrp route-timeout <time_val>

Sets timeout interval for DVMRP routes; the “no

no ip dvmrp route-timeout

ip dvmrp route-timeout” command restores the

default setting.

4. Configure DVMRP tunneling

	Command	Explanation
	Interface Mode
	ip dvmrp tunnel <A.B.C.D> [metric	Configures tunneling to neighbor A, B, C, D; the
	<metric_val>]	“no ip dvmrp tunnel” command removes the
	no ip dvmrp tunnel <A.B.C.D>
		tunnel to neighbor A, B, C, D.
5. Disable DVMRP
	Command	Explanation
	Interface Mode
	no ip dvmrp enable	Disables DVMRP

19.5.2.2DVMRP Configuration Commands

zip dvmrp cisco-compatible

zip dvmrp enable

zip dvmrp graft-interval

zip dvmrp metric

zip dvmrp nbr-timeout

zip dvmrp probe-interval

zip dvmrp report-interval

zip dvmrp route-timeout

zip dvmrp tunnel

zshow ip dvmrp mroute

zshow ip dvmrp neighbor

zshow ip dvmrp route

zshow ip dvmrp tunnel

zdebug ip dvmrp detail

zdebug ip dvmrp pruning

482