These parameters can only be configured via the web interface:

1)Go to ACCOUNT [ ACCOUNT SETTINGS.

2)Select desired account.

3)Set any desired parameters in the Advanced section.

Check with the network administrator or service provider for more information.

Network Settings

Please refer to the “Configuration and Registration” section for the Basic Network WAN setting information. The next paragraphs will describe other Network related settings.

Advanced Network Settings

VLAN

VLAN is a group of hosts with a common set of requirements that communicate as if they were attached to the Broadcast domain, regardless of their physical location.

The IP120 supports 802.1p and q packet tagging. VLAN ID and Priority can be set via the phone or web interface.

To configure VLAN settings via Phone interface:

1)Make sure the active User Type is admin or var

2)Press the Menu soft key [3. SETTINGS [2. ADVANCED.

3)Enter the password required, scroll to the 2.Network option, press the OK but- ton and select 2.VLAN, then press the OK button or the Enter soft key to enter.

4)Choose WAN Port and press the OK button or the Enter soft key to enter.

5)Use the LEFT or RIGHT navigation keys to choose and set the VLAN Status; input the VID Number and Priority.

6)Press the OK button or Save soft key to save the settings, or the Back soft key to return to VLAN menu.

To configure VLAN settings via the web interface:

Choose NETWORK[ADVANCED. Perform necessary changes. Check with the network administrator for more information.

35

Page 35
Image 35
RCA IP120 manual Advanced Network Settings, To configure Vlan settings via Phone interface