ES4710BD 10 Slots L2/L3/L4 Chassis Switch

zshow ip rip

zdebug ip rip packet

zdebug ip rip recv

zdebug ip rip send

18.3.2.2.1auto-summary

Command: auto-summary no auto-summary

Function: Configures route aggregation; the “no auto-summary”command disables route aggregation.

Parameters: N/A.

Default: Auto route aggregation is not used by default.

Command mode: RIP configuration mode

Usage Guide: Route aggregation reduces the amount of routing information in the route table and amount of information to be exchanged. RIP-I does not support subnet mask, forwarding subnet route may result in ambiguity. For this reason, route aggregation is always enabled for RIP-I. If you are using RIP-II, you can use “no auto-summary” command to disable route aggregation. If subnet route needs to be broadcasted, route aggregation can also be disabled.

Example: Setting the RIP version to RIP-II and disables route aggregation. Switch(Config)#router rip

Switch(Config-Router-Rip)#version 2 Switch(Config-Router-Rip)#no auto-summary

Related command: version

18.3.2.2.2default-metric

Command: default-metric <value> no default-metric

Function: Sets the default route metric for route to be introduced; the “no default-metric command restores the default setting.

Parameters: < value> is the value of route metric, ranging from 1 to 16.

Default: The default route metric is 1.

Command mode: RIP configuration mode

Usage Guide: default-metric command sets the default route metric used in introducing routes from the other routing protocols to RIP. When using “redistribute” command to introduce routes of the other protocols without specifying a detailed route metric, the default route metric set by default-metric command applies.

Example: Sets the default route metric for introducing routes of the other protocols into RIP to 3. Switch(Config-router-rip)#default-metric 3

Related command: redistribute

18.3.2.2.3ip rip authentication key-chain

390

Page 391
Image 391
Accton Technology ES4710BD manual Auto-summary, Default-metric, Ip rip authentication key-chain