Accton Technology ES4710BD manual Debug lacp, Command debug lacp no debug lacp

	ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Collecting	Whether status of port bound status machine is “collecting” or not.
Distributing	Whether status of port bound status machine is “distributing” or
	not.
Defaulted	Whether the local port is using default partner end parameter.
Expired	Whether status of port receiving status machine is “expire” or not.
Selected	Whether the port is selected or not..

5.Display port-channel information for port-group1. Switch# show port-group 1 port-channel

Port channels in the group 1:

-----------------------------------------------------------

Port-Channel: port-channel1

Number of port : 2 Standby port : NULL

Port in the port-channel :

Index	Port	Mode
------------------------------------------------------
1	Ethernet1/1	active
2	Ethernet1/2	active
Displayed information		Explanation
Port channels in the group		If port-channel does not exist, the above information will not be
		displayed.
Number of port		Port number in the port-channel.
Standby port		Port that is in “standby” status, which means the port is qualified to
		join the channel but cannot join the channel due to the maximum
		port limit, thus the port status is “standby” instead of “selected”.

13.4.1.2debug lacp

Command: debug lacp no debug lacp

Function: Enables the LACP debug function: “no debug lacp” command disables this debug function.

Command mode: Admin Mode

Default: LACP debug information is disabled by default.

Usage Guide: Use this command to enable LACP debugging so that LACP packet processing information can be displayed.

Example: Enabling LACP debug.

294