ES4710BD 10 Slots L2/L3/L4 Chassis Switch
send file
150 Opening ASCII mode data connection for nos.img.
226 Transfer complete. close ftp client.
&The following is the message displays when files are successfully received. Otherwise, please verify link connectivity and retry “copy” command again.
220
331User name okay, need password.
230User logged in, proceed.
200PORT Command successful. recv total = 1526037
************************
write ok
150Opening ASCII mode data connection for nos.img (1526037 bytes).
226Transfer complete.
& If the switch is upgrading a system file or the system start up file through FTP, the switch must not be restarted until “close ftp client” or “226 Transfer complete” is displayed, indicating the upgrade was successful, otherwise the switch may be rendered unable to start. If the system file and system start up file upgrade through FTP fails, please try to upgrade again or use the BootROM mode to upgrade.
5.5.2.4.5TFTP Troubleshooting Help
When upload/download system file with TFTP protocol, the connectivity of the link must be ensured, i.e., use the “ping” command to verify the connectivity between the TFTP client and server before running the TFTP program. If ping fails, you will need to check for appropriate troubleshooting information to recover the link connectivity.
&The following is the message displayed when files are successfully transferred. Otherwise, please verify link connectivity and retry “copy” command again.
nos.img file length = 1526021 read file ok
begin to send file,wait...
file transfers complete. close tftp client.
138