ES4710BD 10 Slots L2/L3/L4 Chassis Switch
(3)Configure other OSPF protocol parameters
a.Configure OSPF routing protocol priority
b.Configure cost for OSPF STUB area and default route
c.Configure OSPF virtual link
Command |
|
| Explanation |
OSPF protocol configuration mode |
|
| |
|
|
| Configures the priority of OSPF among |
preference [ ase ] <preference > |
| all the routing protocols, and the priority | |
| for AS exterior routes introduced; the “no | ||
no preference [ ase ] |
| ||
| preference [ ase ]” command restores the | ||
|
|
| |
|
|
| default setting. |
stub cost <cost> area <area_id > |
| Sets an area to STUB area; the “no stub | |
no stub area <area_id > |
| area <area_id >” command cancels the | |
|
|
| setting. |
|
|
|
|
virtuallink | neighborid | <router_id> | Creates and configures virtual link; the |
transitarea <area_id> [ hellointerval <time> ] | “no virtuallink neighborid <router_id> | ||
[ deadinterval <time> ] [ retransmit <time> ] | transitarea <area_id>” command deletes | ||
[ transitdelay <time> ] |
| a virtual link. | |
no virtuallink neighborid <router_id> |
| ||
transitarea <area_id> |
|
| |
d. Configure the priority of the interface when electing designated layer 3 switch (DR).
CommandExplanation
Interface Mode
| ip ospf priority <priority> | Sets the priority of the interface in “designated |
| no ip ospf priority | layer 3 switch” election; the “no ip ospf priority” |
|
| command restores the default setting. |
3. Disable OSPF protocol. |
| |
| Command | Explanation |
| Global Mode |
|
| no router ospf | Disables OSPF routing protocol |
18.4.2.2OSPF Configuration Commands
zdefault redistribute cost
zdefault redistribute interval
zdefault redistribute limit
zdefault redistribute tag
zdefault redistribute type
zip opsf authentication
zip ospf cost
410
