ES4710BD 10 Slots L2/L3/L4 Chassis Switch
[0]: Add telnet user
[1]: Config telnet server status
[2]: Exit
Selection number:
The corresponding prompt in Chinese is:
配置 Telnet 服 器 |
|
[0]: 添加 Telnet 服 | 器用 |
[1]: 配置 Telnet 服 | 器的状 |
[2]: 返回上一 菜 |
|
序号: |
|
Select “0” in the Telnet server configuration menu and press Enter, the following screen will appear: Please input the new telnet user name :
The corresponding prompt in Chinese is:
入要添加的 Telnet 用 名:
Note: Valid username length is 1 to 16 characters. When a user enters a valid username and presses Enter, the following screen will appear:
Please input the new telnet user password:
The corresponding prompt in Chinese is:
入用 密 :
Note: Valid password length is 1 to 8 characters. After configuring the username and password, the menu will return to the Telnet server configuration section.
Select “1” in the Telnet server configuration menu and press Enter, the following will screen appear: Enable switch
The corresponding prompt in Chinese is:
是否使能交 机 Telnet 服 器?(y/n) [y]:
Type “n” and press Enter to disable Telnet service. Type “y” and press Enter, or just press Enter to
73
