Accton Technology ES4710BD manual Panel Status Description Indicator Symbol, Xenpak

ES4710BD 10 Slots L2/L3/L4 Chassis Switch

1.4.2.4.2Front Panel - Indicator

The following table describes the front panel indicators for the EM4700BD-2XG-XENPAK:

Table 1.8 Description of the EM4700BD-2XG-XENPAK indicators

LED	Panel	Status		Description
Indicator	Symbol
Power	PWR	On (green)	Card powered.
Indicator		Off	Card powered off
		On (Green, blinks at 1 Hz)	Card operating normally
		On (Green, blinks at 8 Hz)	System is loading (Booting after cards hot
			swapping)
Operation
	RUN	On (Yellow, blinks at 8 Hz)	System is shutting down (Shutting Down
indicator
			after SWAP button pressed)
		On (Red, blinks at 8 Hz)	Malfunction status
		Off	Card is powered off and can be removed.
XENPAK port indicator
Status		On (Green)	Network	connection	on	XENPAK
	Link		transceiver is normal
indicator:		Off	No network connection			present on
			XENPAK transceiver
Transmission	Act	Blinking (Green)	Sending or receiving data
Indicator

1.4.2.4.3Front Panel Port Description

EM4700BD-2XG-XENPAK provides 2 XENPAK 10Gb fiber transceiver slots;

	Table 1.9 XENPAK port descriptions
Port Type	Specification
	z XENPAK-SC transceiver (10GBASE-LR LAN-PHY)
XENPAK	(Agilent HFCT-701XB, LAN mode, wavelength 1310nm)：
	62.5/125 µm multi-mode fiber (MMF): 300m
	9/125 µm single-mode fiber (SMF): 10Km

1.4.2.4.4Front Panel – Reset Button

The EM4700BD-2XG-XENPAK provides a RESET button for resetting the board.

45