Miller Electric 452, 652 (60 Hz) Input Connection Label, Electric Shock And Airflow Label, ? a

.A complete Parts List is available at www.MillerWelds.com

3-2. Input Connection Label

1		2		3	4
1	2			3	? V
	? V
	? A				5
					3
				4
					S-179 290
5	6	7	8		9

1 Warning! Watch Out! There are possible hazards as shown by the symbols.

2 Electric shock from wiring can kill.

3 Disconnect input plug or power before working on machine.

4 Read the Owner’s Manual

before working on this machine.

5 Consult rating label for input power requirements, and check power available at the job site − they must match.

6 Read Owner’s Manual and inside labels for connection points and procedures.

7 Move jumper links as shown on inside label to match voltage at job site.

8 Having a loop of extra length, connect grounding conductor first.

9 Connect line input conductors as shown on inside label − double-check all connections, jumper link positions, and input voltage before applying power.

1/96

3-3. Electric Shock And Airflow Label

1 2 3

S-179 563

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2Electric shock from wiring and exposed weld terminals can kill.

3Close door before turning on unit.

1/96

3-4. Nameplate Safety Symbols

				1	Warning! Watch Out! There
					are possible hazards as
	1	1			shown by the symbols.
				2	Electric shock from welding
					electrode or wiring can kill.
				3	Sparks from arcing electrode
					can cause explosion or fire −
					disconnect cable for process
					not in use.
				4	Read Owner’s Manual for
					connection procedures.
				5	Electric shock from wiring can
					kill.
		5	6	6	Disconnect input power
					before working on unit or
2	3	4
					making terminal strip

connections.

Nameplate D-179 389

OM-222 Page 8