Miller Electric 402, 652 (60 Hz), 302 Remote 14 Receptacle Information, Connecting Remote Control

		. A complete Parts List is available at www.MillerWelds.com
4-11. Remote 14 Receptacle Information
	Socket	Information
	A	24 volts ac. Protected by supplementary protector CB2.
24 VOLTS AC	B	Contact closure to A completes 24 volts ac contactor control circuit.
	C	Command reference; 0 to +10 volts dc.
REMOTE OUTPUT CONTROL	D	Remote control circuit common.

	E	0 to +10 volts dc input command signal from remote control.
	F	Current feedback; 1 volt per 100 amperes.
	H	Voltage feedback; 1 volt per 10 arc volts.
	I	115 volts, 15 amperes, 60 Hz ac. Protected by supplementary protector CB1.
115 VOLTS AC	J	Contact closure to I completes 115 volts ac contactor control circuit.
GND	K	Chassis common.
	G	Circuit common for 24 and 115 volts ac circuits.
REMOTE POWER ON/OFF	*	To remote On/Off switch.
	*
REMOTE VOLTAGE SENSING	*	Voltage sensing signal from Negative (-) weld output terminal.
	*	Voltage sensing signal from Positive (+) weld output terminal.
* Not Used

4-12. Connecting Remote Control

1 Remote 14 Receptacle RC8 Connect remote control to RC8.

1

A K		J I
B
C	L N	H
D	M	G
	E	F

OR OR

Ref. ST-800 101-D / ST-141 127-D

OM-222 Page 17